Table of Contents
- 1. Why Filter Parts Are Critical for Terex TR100?
- 2. Key Filter Parts of Terex TR100: Classification & Functions
- 2.1 Air Intake System Filters
- 2.2 Engine Lubrication System Filters
- 2.3 Fuel & Cooling System Filters
- 2.3.1 Fuel System Filters & Oil-Water Separators
- 2.3.2 Cooling System Filters
- 2.4 Transmission & Hydraulic System Filters
- 2.5 Steering System Filters
- 3. Important Tips for Choosing & Using Terex TR100 Filter Parts
- 4. Complete Filter Parts List for Terex TR100
Terex TR100 is a classic heavy-duty mining dump truck, widely used in large-scale mining operations around the world. It operates in harsh environments with high dust, heavy loads and frequent start-stop, which puts high demands on the reliability and stability of its filter system.
The filter parts are the core components that protect the engine, transmission system, hydraulic system and braking system of the TR100. Choosing the right filter parts that match the original specifications can effectively reduce equipment failure rate, extend service life and improve mining operation efficiency.
This article will detail the key filter parts of Terex TR100, explain their functions and maintenance tips, and attach a complete part list at the end, which is suitable for daily maintenance, procurement and inventory management.

1. Why Filter Parts Are Critical for Terex TR100?
Mining environments are full of dust, gravel and other impurities, which will enter the key systems of the Terex TR100 if not filtered effectively. These impurities will cause serious wear to precision components such as engine cylinders, bearings, hydraulic pumps and injectors, leading to early failure of the equipment and increased maintenance costs.
The filter parts act as a “protective barrier” for the truck, which can filter out impurities in air, oil, diesel and cooling water, ensure the normal operation of each system, and reduce unplanned downtime. For mining operators and maintenance teams, mastering the filter parts information of TR100 is essential to improve equipment availability.
2. Key Filter Parts of Terex TR100: Classification & Functions
The filter parts of Terex TR100 are mainly divided into 5 categories, covering air intake system, lubrication system, fuel & cooling system, transmission & hydraulic system, and steering system. Each type of filter has a unique function and plays an important role in the stable operation of the truck. Below is the detailed classification and function introduction (with small grammar or spelling mistake to fit actual business writing):
2.1 Air Intake System Filters
The air intake system filter is used to filter dust and impurities in the air, prevent them from entering the engine cylinder, and protect the piston, cylinder liner and other precision components from wear. The Terex TR100 is equipped with two air filters: outer air filter and inner air filter, which form a two-stage filtration system to improve filtration efficiency.
- Outer Air Filter: Part No. AF25454, Terex PN: 15270188
- Inner Air Filter: Part No. AF25468, Terex PN: 15270189
Maintenance tips: Check the air filter every 200 working hours. Clean the outer filter with compressed air if it is dirty, but do not clean the inner filter repeatedly (replace it directly if it is dirty). Replace both inner and outer filters every 1000 working hours, or advance the replacement cycle if the mining environment is extremely dusty.
2.2 Engine Lubrication System Filters
The lubrication system filter is used to filter metal debris, sludge and other impurities in the engine oil, ensure the cleanliness of the oil, and provide effective lubrication for the crankshaft, bearings and other friction pairs. This can reduce wear and tear of engine components and extend the overhaul cycle of the engine.
- Oil Filter Element: Part No. LF670, Terex PN: 15267513
- Oil Filter Element: Part No. LF777, Terex PN: 15267514
- Oil Filter Element: Part No. LF14000N, Terex PN: 42551676
- Oil Filter Element: Part No. LF9070, Terex PN: 15313507
Maintenance tips: Replace the oil filter element every time you change the engine oil (usually every 250 working hours). When replacing, ensure that the filter is installed tightly to avoid oil leakage. Do not use inferior filter elements, which will fail to filter effectively and cause serious damage to the engine.
2.3 Fuel & Cooling System Filters
The fuel system filter and cooling system filter are important to ensure the stable operation of the engine. The fuel filter filters impurities in diesel to protect the high-pressure fuel pump and injector; the water filter filters impurities in the cooling water to prevent scale and corrosion; the oil-water separator separates water from diesel to avoid rust and blockage of the fuel system.
2.3.1 Fuel System Filters & Oil-Water Separators
- Diesel Filter Element: Part No. FS1216, Terex PN: 15267633
- Diesel Filter Element: Part No. FS1040
- Oil-Water Separator: Part No. 20056739
- Oil-Water Separator: Part No. FS19765
2.3.2 Cooling System Filters
- Water Filter Element: Part No. WF2074, Terex PN: 15270826
- Water Filter Element: Part No. WF21216
Maintenance tips: Replace the diesel filter and oil-water separator every 500 working hours. Drain the water in the oil-water separator regularly (at least once a week) to avoid water entering the fuel system. Replace the water filter element every 1000 working hours, and check the coolant level and quality at the same time.
2.4 Transmission & Hydraulic System Filters
The transmission system and hydraulic system are the core of the Terex TR100’s power transmission and operation. The filter parts in these systems can filter impurities in the transmission oil and hydraulic oil, protect the gear mechanism, hydraulic pump, valve body and other components, and avoid transmission failure and hydraulic system leakage.
- Gearbox Filter Element: Part No. 15270496
- Gearbox Filter Element: Part No. 29558464
- Disc Brake Filter Element: Part No. 15503254
- Oil Suction Filter Element: Part No. 9068999
- Single Filter: Part No. 9038953
Maintenance tips: Replace the gearbox filter element every 1500 working hours. Check the hydraulic filter element every 500 working hours, and replace it if it is blocked. The disc brake filter element should be replaced every 1000 working hours to ensure the sensitivity and reliability of the braking system.
2.5 Steering System Filters
The steering system filter is used to filter impurities in the steering hydraulic oil, ensure the smooth operation of the steering system, reduce the risk of steering jamming and leakage, and improve the handling stability of the truck under heavy load conditions.
- Filter Element in Steering Box: Part No. 15265318
- Steering Filter Element: Part No. 15503601
Maintenance tips: Check the steering filter element every 750 working hours. Replace it in time if it is dirty or blocked. Regularly check the steering hydraulic oil level and supplement it if it is insufficient to ensure the normal operation of the steering system.
3. Important Tips for Choosing & Using Terex TR100 Filter Parts
- Choose Original or High-Quality Replacement Parts: It is recommended to use filter parts that match the original Terex PN or high-quality replacement parts. Inferior filter parts have poor filtration effect and short service life, which will cause serious damage to the truck’s key systems.
- Strictly Follow the Replacement Cycle: Different filter parts have different replacement cycles. Follow the maintenance manual and actual operation environment to replace them on time, which can effectively reduce equipment failure rate.
- Pay Attention to Installation Correctly: When installing the filter, ensure that the seal is intact and the installation is tight to avoid oil or air leakage. For the oil filter, fill the filter with oil before installation to prevent dry friction of the engine at startup.
- Store Filters Properly: Store the filter parts in a dry, clean and ventilated place, avoid dust and moisture pollution, and do not store them for a long time (the shelf life is generally 12 months).
4. Complete Filter Parts List for Terex TR100
| Item No | Description | Part No | Terex PN |
|---|---|---|---|
| 1 | air filter (outer) | AF25454 | 15270188 |
| 2 | air filter (inner) | AF25468 | 15270189 |
| 3 | oil filter element | LF670 | 15267513 |
| 4 | oil filter element | LF777 | 15267514 |
| 5 | water filter element | WF2074 | 15270826 |
| 6 | diesel filter element | FS1216 | 15267633 |
| 7 | gearbox filter element | 15270496 | |
| 8 | single | 9038953 | |
| 9 | disc brake filter element | 15503254 | |
| 10 | filter element in steering box | 15265318 | |
| 11 | steering filter element | 15503601 | |
| 12 | oil suction filter element | 9068999 | |
| 13 | oil filter element | LF14000N | 42551676 |
| 14 | gearbox filter element | 29558464 | |
| 15 | oil water seperator | 20056739 | |
| 16 | oil filter element | LF9070 | 15313507 |
| 17 | diesel filter element | FS1040 | |
| 18 | water filter element | WF21216 | |
| 19 | oil water seperator | FS19765 |
Note: The Terex PN in the table is the original part number of Terex, which is used to ensure the compatibility and adaptability of the parts. The replacement cycle of the filter parts can be adjusted according to the actual mining environment and operation intensity.




