15233302 Rear Wheel Hub for Terex TR100 Dump Truck

$1.00

+ Contact us for the best price.
  • System Location & Primary Function:
    Mounted at the rear axle housing end between the planetary final drive assembly and rear dual wheels, this heavy-duty rear wheel hub supports vertical gross vehicle weight while transmitting high rotational torque from the planetary gear set to the tires.
  • Fitment & Application Scope:
    Engineered as a direct replacement spare part for Terex TR100 and NHL TR100 rigid mining dump trucks operating in demanding open-pit mining, quarry hauling, and extreme shock-load conditions.
  • Material Composition & Fatigue Resistance:
    Cast from high-density, structural ductile iron (QT500-7 / ASTM A536) and precision CNC-machined to resist fatigue cracking, hub distortion, and intense thermal dissipation generated by wet disc brake systems.
  • Operational Uptime & Fitment Precision:
    Manufactured strictly to OEM dimensional specifications to guarantee precise bearing cup seating tolerances, zero runout, and rapid field replacement without housing modification.

Contact Us Now

Guangzhou Ulanton Terex Machine Parts Co., Ltd.

Part Number: 15233302
Part Name: Rear Wheel Hub
Compatible Model: Terex
Part Title: Terex Parts Asia 15233302 Rear Wheel Hub

Terex Parts Asia 15233302 Rear Wheel Hub
Terex Parts Asia 15233302 Rear Wheel Hub

Product Overview

The 15233302 rear wheel hub is an essential structural power-transmitting component within the rear axle system of heavy-duty rigid haul trucks. Installed at the drive axle ends, this hub supports heavy payload pressures while accommodating high-capacity tapered roller bearings and anchoring the planetary final drive carrier and rear brake assemblies.

In continuous haulage applications, rear wheel hubs are subjected to severe torsional stress, massive payload weights, road impact vibrations, and extreme thermal transfer from continuous retarder braking. Over time, these conditions induce bearing seat fretting, wheel stud hole deformation, micro-cracking, and structural warping. Replacing compromised hubs with this premium replacement component restores exact bearing alignment, eliminates wheel assembly wobble, prevents fluid leakage into brake cavities, and safeguards the planetary gear drive against catastrophic mechanical failure.

Part Number & Cross-Reference Mapping

OEM Part Number Interchangeability

Original Part NumberReplacement Part NumberInternal SKUCompatibility
1523330215233302-ALTSKU-TR100-HUB-15233302Terex TR100 / NHL TR100
1502330215233302-RPLSKU-TR100-HUB-15023302Terex Rigid Haulers
1523601515233302-HDSKU-TR100-HUB-15236015NHL 100-Ton Dump Truck

Technical Specifications & Engineering Standards

ParameterTarget SpecificationMaterial/Standard
Component TypeRear Axle Heavy-Duty Wheel HubOEM Specifications Met
Housing MaterialHigh-Strength Ductile Iron Cast StructureQT500-7 / ASTM A536
Tensile Strength≥ 500 MPaISO 1083 Standard
Bearing Seat TolerancePrecision CNC Turned (H7 Bore Tolerance)ISO Fit Class
Sealing SystemHigh-Temperature Heavy-Duty Lip SealsFluororubber (Viton) / HNBR

Material Composition & Manufacturing Integrity

This replacement rear wheel hub is constructed using high-density ductile iron castings to ensure high tensile strength and shock-absorbing capacity under intense hauling cycles. All mounting faces, seal bores, and bearing race seats undergo high-precision CNC machining to achieve strict geometric tolerance limits. High-performance Fluororubber (Viton) dynamic seals are integrated into the assembly interface to preserve gear oil viscosity and seal out abrasive mine dust, moisture, and fine rock debris.

Comprehensive Equipment Compatibility

Equipment BrandModel SeriesApplication Type
Terex Rigid HaulersTR100 SeriesRear Drive Axle & Wheel Mount
NHL (North Hauler)TR100 Mining Dump TruckRear Wheel Hub & Planetary Interface
Terex Off-Highway100-Ton Class Mining TrucksRear Wheel Support Assembly

 

Maintenance, Installation & Field Troubleshooting Guide

Critical Installation Practices

  • Thoroughly clean the spindle spindle tube and inspect bearing journals for corrosion, scoring, or thermal discoloration prior to fitting the hub assembly.
  • Ensure inner and outer bearing cups are fully driven and seated square against internal shoulder stops using a dedicated bearing installation driver.
  • Apply clean heavy-duty gear oil (SAE 85W-140 EP) to all bearing rollers and seal lip contact zones during bench assembly to prevent dry initial rotation.
  • Replace all mating O-rings and face seals, ensuring proper torque sequence on final drive housing retainers to avoid oil leakage.
  • Torque wheel studs in a cross-star pattern according to factory service guidelines, verifying pre-load endplay with a dial indicator before vehicle operation.

Field Diagnostic Signs

  • Metallic grinding, humming, or knocking noises emanating from the rear wheel ends during loaded acceleration or braking.
  • Visible gear lubricant pooling along the inner rim or dripping onto the rear wet brake housing assembly.
  • Elevated hub cap temperatures detected during routine post-shift fleet walkaround inspections.
  • Irregular rear tire tread wear caused by excessive axial endplay or bearing misalignment inside the hub housing.

Frequently Asked Questions (FAQ)

What bearing cup press-fit tolerances are maintained on the 15233302 wheel hub?

Internal bearing seats are CNC-machined to ISO H7 precision bore standards, establishing an accurate interference fit that eliminates bearing cup spinning and fretting corrosion under shock loads.

Can this rear wheel hub be installed directly without spindle housing modification?

Yes. This replacement spare part is designed to exact factory specifications, ensuring direct dimensional interchangeability with existing spindle shafts, planetary carriers, and brake mountings.

What maintenance procedures prolong the service life of this rear wheel hub?

Regular oil sampling at 250-hour intervals, replacing hub oil seals during brake overhauls, and inspecting magnetic drain plugs for metal shavings will maximize component service life.

Related Systems & Interlinked Components

  • Terex TR100 Rear Axle Tapered Roller Bearing Kit
  • TR100 Final Drive Planetary Gear Assembly & Ring Gear
  • Rear Wheel Studs (Grade 10.9) and Flange Wheel Nuts
  • Rear Axle Shaft 15233302 Spline Drive Flange
  • Rear Axle Wet Brake Disc Pack & Viton Seal Repair Kits

Related Part Numbers:

No.P.N.Part Name
115301782Terex Parts 15301782 BOARD
215227605Terex Parts 15227605 TRANSMITTER
39419495Terex Parts 9419495 LOCKNUT
49368578Terex Parts 9368578 ALTERNATOR
515503196Terex Parts 15503196 SHROUD
69030887Terex Parts 9030887 BEARING
78547581Terex Parts 8547581 CORE
82325694Terex Parts 2325694 THREAD PROTECTOR
96837129Terex Parts 6837129 BLOCK
109383774Terex Parts 9383774 BRACKET
We specialize in genuine Terex parts, OEM-certified components, and premium aftermarket parts for Terex off-highway dump trucks.
Our high-durability, Terex-compatible parts—backed by low MOQ, cost-friendly pricing, fast delivery, and strict QC.
Ulanton - High-Quality Terex TR60 Off-Highway Dump Truck Spare Parts Terex Dump Truck Hydraulic & Transmission Parts: Main Hydraulic Pump 708-3T-00161 and Final Drive Housings for TR100, TR60, TR50, TR35, TA400, TA300, 3307, 3305, 3304, NTE240, NTE260, MT3600, MT3300, MT3700, MT4400, MT5500 and Allison Transmission Parts for Terex Trucks from Ulanton Ulanton Machine & Spare Parts Co., Ltd. Factory: Direct Supplier of Terex & NHL Off-Highway Dump Truck Parts for TR100, TR60, TR50, TR35, TA400, TA300, 3307, 3305, 3304, NTE240, NTE260, MT3600, MT3300, MT3700, MT4400, MT5500 and Allison Transmission Parts for Global Shipping
Part Name

Rear Wheel Hub

Part Number

15233302

Shopping Cart